Shanghai Exheat Industries Co., Ltd
+86-13545529361

Why Does the Same Equipment Heat Up Faster for Others? The Key to Improving Plate Heat Exchanger Efficiency

Oct 28, 2026

Why Does the Same Equipment Heat Up Faster for Others? The Key to Improving Plate Heat Exchanger Efficiency

In factories, one of the most common complaints is: "Why is this water still not hot enough?"

The steam valve is already fully open, and the pump is running at full speed, yet the outlet temperature stubbornly refuses to rise.

This is a typical sign of low heat transfer efficiency.

It not only delays production but also wastes energy. When the factory manager looks at the electricity meter and flow meter, the costs keep adding up.

So, is there a way to give your plate heat exchanger a boost and significantly improve its efficiency?

Absolutely! Here are several practical ways to get better heat transfer performance.

1. Clean the Plates: Removing Scale Is the First Step Toward Better Efficiency

This method may sound basic, but it is one of the most effective ways to improve heat transfer.

Scale is one of the biggest enemies of heat transfer. Just 1 mm of scale can resist heat transfer far more than metal does.

In many cases, low efficiency does not mean the equipment is underperforming because of its design. It may simply be dirty. A layer of scale forms an insulating film on the plate surfaces, making it harder for heat to pass through.

Tip for improving efficiency: Don't skip cleaning when it is needed!

Perform chemical cleaning regularly, including online cleaning where appropriate, to remove this insulating layer. Once the scale is removed, heat transfer efficiency can recover significantly and may return to its original design performance if no other problems are present.

22

2. Increase Fluid Velocity to Keep the Flow Moving

Plate heat exchangers are designed to use the corrugated patterns on the plates to create intense turbulence in the fluid.

The stronger the turbulence, the better the heat transfer performance, generally speaking.

If the fluid velocity is too low-for example, because the pump is operating at too low a setting-the flow between the plates may become less turbulent, reducing heat transfer efficiency.

Strategy for improving efficiency:

Increase the flow velocity as much as possible within the allowable pressure-drop range.

Check the pump frequency or adjust the valves as appropriate to help the fluid flow more effectively through the plate channels.

3. Remove Trapped Air Thoroughly

This problem is easy to overlook because it is not always obvious.

If air accumulates inside the heat exchanger, it can interfere with fluid contact with the plate surfaces and reduce the effective heat transfer area. As a result, part of the heat exchanger's capacity may go unused.

Recommendation:

Before starting the equipment, open the air vent at the highest point to release trapped air.

If air keeps accumulating in the system, check whether air is entering through a leak or another point in the system.

4. Add Plates or Adjust the Flow Arrangement

If you have tried the methods above but the heat transfer performance is still insufficient, the heat exchanger may not have enough heat transfer area for the current operating requirements.

In that case, further adjustments may be necessary.

Tip for improving efficiency:

  • Add more plates: One advantage of plate heat exchangers is their flexibility. If the frame has sufficient capacity and space, additional plates may be installed to increase the heat transfer area and improve performance. Confirm compatibility and the equipment manufacturer's limits before making changes.
  • Adjust the flow arrangement: If the temperature difference is large but the flow velocity is low, ask the manufacturer to recalculate the design. Changing from a single-pass to a two-pass arrangement may help increase fluid velocity through the channels and improve heat transfer, depending on the operating conditions. However, the resulting pressure drop and overall performance must also be checked.

Final Thoughts

Improving the efficiency of a plate heat exchanger is essentially about making the best use of available resources.

Keep the plates clean, maintain suitable fluid velocity, and ensure that the effective heat transfer area meets operating requirements.

With proper maintenance and operation, you can help your plate heat exchanger deliver better heat transfer performance while reducing unnecessary energy consumption.