Shanghai Exheat Industries Co., Ltd
+86-13545529361

What Should You Do If Your Plate Heat Exchanger Is Leaking? How to Quickly Identify the Cause and Fix It

Oct 26, 2026

What Should You Do If Your Plate Heat Exchanger Is Leaking? How to Quickly Identify the Cause and Fix It

Plate heat exchangers are the "heat transfer workhorses" of the industrial world, working tirelessly every day under high temperatures and pressures. But one day, you may notice dripping or leaking water. This not only affects heat transfer efficiency but may also damage the equipment or even cause safety incidents. When faced with this problem, many people's first reaction is, "Should I just replace it?" However, plate heat exchangers are not cheap, and replacing the entire unit can be costly.

Don't rush into replacing it. Today, we'll take a closer look at the real causes of plate heat exchanger leaks, explain how to quickly and accurately locate the fault, and provide targeted repair solutions to help restore your equipment to optimal working condition.

1. Why Do Plate Heat Exchangers Leak? Don't Let These Common Causes Damage Your Equipment!

Before solving the problem, you first need to understand why it occurs. Plate heat exchanger leaks can generally be divided into two types: internal leakage and external leakage. Each type has different causes.

1.1 Internal Leakage: Hot and Cold Fluids Are Mixing-A Major Problem for Heat Exchangers!

Internal leakage occurs when hot and cold fluids, which should flow through separate channels, mix due to a fault. This is particularly dangerous because mixing the two media can reduce heat transfer efficiency or, in more serious cases, cause production accidents.

Possible causes:

  • Corrosion and perforation of plates: After long-term operation, corrosive media, such as water with high chloride content or highly acidic or alkaline liquids, may corrode the metal plates and create tiny holes, allowing hot and cold fluids to mix.
  • Cracks in the plates: Plates exposed to high temperatures and pressures over extended periods may develop fatigue cracks. Cracks are more likely to occur near welded joints.
  • Aged or misaligned gaskets: Gaskets act as barriers that keep hot and cold fluids separate. If they become aged, deformed, or improperly installed, internal leakage may occur.

1.2 External Leakage: When Your Heat Exchanger "Cries," These Areas Are Most Vulnerable!

External leakage occurs when water drips or sprays directly from a part of the heat exchanger. Common causes include:

  • Aged or damaged gaskets: Over time, gaskets may become hard and brittle or develop cracks, eventually allowing fluid to leak out.
  • Loose clamping bolts: Clamping bolts are essential for securing the plates. If they are not properly tightened during installation or become loose due to long-term vibration, sealing performance may deteriorate, resulting in external leakage.
  • Deformed plates: When equipment operates under excessive loads or experiences impact, the plates may become slightly deformed. This can compromise the seal and cause leakage.
  • Improper cleaning or maintenance: For example, residual cleaning chemicals may corrode the plates, or gaskets may become misaligned during reassembly. Either problem can lead to leakage.

2. What Should You Do When a Leak Occurs? Follow These Steps to Pinpoint the Problem!

If you discover a leak in your plate heat exchanger, don't panic. Follow these five steps to investigate the problem systematically and identify the source of the leak.

2.1 Step 1: Check the Leakage Location to Determine Whether It Is Internal or External

If the two media are mixing-for example, hot water is present in the cold-water side or water is mixed with oil-the problem may be internal leakage.

If water is dripping or spraying only from the outside of the equipment, the problem is likely external leakage.

2.2 Step 2: Inspect the Exterior and Rule Out Obvious Problems

Check around the gaskets for visible moisture or accumulated water.

Check whether the clamping bolts are loose. If necessary, tighten them appropriately using a torque wrench and the specified torque values.

Inspect the plates for obvious deformation or misalignment that could result in poor sealing.

2.3 Step 3: Disassemble the Heat Exchanger and Check for Aged or Misaligned Gaskets

After opening the heat exchanger, check whether the gaskets have become hard, cracked, or damaged.

Make sure the gaskets are properly seated in their grooves and check for misalignment or twisting.

2.4 Step 4: Check the Plates for Corrosion, Perforation, or Cracks

  • Light inspection: Hold each plate against a light source and look for pinholes that allow light to pass through.
  • Dye penetrant testing: Apply a suitable dye penetrant to one side of the plate and check whether it appears on the other side to help identify tiny cracks or defects. Appropriate testing procedures should be followed.

2.5 Step 5: Test the Water Quality to Determine Whether Corrosion Is the Cause

Check the chloride concentration in the water. If it is too high (above 200 ppm), corrosion-related perforation may be a possible cause of leakage. The acceptable limit depends on the plate material and operating conditions.

Check whether the circulating water pH is within a suitable range, such as 6.5–8.5, to help reduce the risk of acid or alkaline corrosion. The appropriate range depends on the system and materials.

3. Repair Solutions: How to Fix Different Types of Leakage

  • Damaged gaskets: Replace the damaged gaskets and make sure they are installed correctly to prevent misalignment or lifting.
  • Loose clamping bolts: Tighten the bolts evenly according to the specified torque requirements. Do not overtighten one side.
  • Perforated plates: If the hole is small, welding repair may be considered where the plate material and design permit it. If corrosion is extensive, replacing the affected plate is recommended.
  • Cracked plates: Minor cracks may sometimes be repaired using a suitable specialized repair compound, if compatible with the plate material and operating conditions. In many cases, however, the plate needs to be replaced.
  • Unsuitable water quality: Improve water quality by using softened water or an appropriate corrosion inhibitor, where suitable for the system, to prevent continued corrosion of the heat exchanger.

4. How to Prevent Plate Heat Exchanger Leaks: Five Maintenance Tips

  • Inspect gaskets regularly. Replace them annually or sooner if their condition indicates significant wear or aging.
  • Control water quality. Avoid operating conditions with excessive chloride concentrations or unsuitable acidity or alkalinity for the plate material.
  • Clean the heat exchanger regularly. Choose appropriate cleaning agents to avoid corrosion or damage to the plates.
  • Check the clamping bolts regularly. Ensure they remain properly tightened to prevent leakage caused by vibration-related loosening.
  • Drain the media during extended shutdowns when appropriate. Follow the equipment manufacturer's shutdown and storage instructions to prevent gasket aging caused by prolonged exposure to the process fluid.

Conclusion: Plate Heat Exchanger Leakage Is Manageable-Accurate Diagnosis and Proper Repair Are Key!

Plate heat exchangers can leak for many reasons, but a systematic inspection can help you identify the cause quickly and choose the right repair solution. More importantly, regular maintenance and proper operation can significantly reduce the risk of leakage and help keep your equipment running reliably for longer.