Plate heat exchanger "magic leakage repair": easy to deal with leakage problems
Abstract: Plate heat exchangers are commonly used in the industrial field, and leakage problems are inevitable. This article will introduce an interesting plate heat exchanger leakage repair method to help you easily deal with the leakage problem.
Magic Leak Repair
First, the magic leakage repair technique of "Velcro".
Preparation materials: Velcro (a kind of sticky double-sided tape), scraper, clean cloth.
Operation steps:
(1) Clean up the leaking gasket area with a spatula to ensure the surface is flat and free of oil;
(2) Stick the Velcro on the leaking gasket, pay attention to the tight fit, leaving no gaps;
(3) Use clean cloth to wipe the surface of Velcro gasket, so that it can be better combined with the gasket.
Second, the magic leakage repair technique of "magic powder".
Preparation materials: magic powder (a special sealant), brush, clean cloth.
Operation steps:
(1) Use the brush to apply the magic powder evenly on the leaking gasket area;
(2) Wipe the applied area with a clean cloth to make the powder bond with the gasket;
(3) Wait for the powder to cure, check the sealing effect, and repeat the application if necessary.
Third, practical exercises: plate heat exchanger leakage repair case
A factory has a plate heat exchanger leakage, after investigation, the leakage is mainly due to the aging of the gasket. The above "Magic Leak Repair Technique" is used to repair the leak:
Repair with Velcro: Firstly, clean up the leakage area, then put the Velcro tightly on the gasket. After testing, the leak was effectively contained.
Repair with Magic Powder: Apply Magic Powder to the leak and wait for it to cure. Inspection results showed that the sealing effect was good and the leakage problem was successfully solved.
Through the interesting plate heat exchanger leakage repair methods introduced in this article, have you mastered these "magic leakage repair techniques"? In the actual operation process, according to the cause of leakage and parts, choose the appropriate repair method, I believe that your plate heat exchanger will be revitalised, to bring you stable heat transfer effect. Of course, regular maintenance and inspection is also the key to ensure the safe and efficient operation of plate heat exchangers. Have a nice day and don't worry about leaks anymore!
I believe that in the near future, this miraculous leak repair technique will be vigorously promoted in the plate heat exchanger industry.
