Shanghai Exheat Industries Co., Ltd
+86-13545529361

How to choose when buying a plate heat exchanger?

Jun 14, 2023

Does the choice of plate heat exchanger make many friends feel distressed? Your company's plate heat exchanger to choose how to choose? Today, I also give the big guys to develop some key interpretation, interpretation of the whole process, I use the market commonly used plate for example, to develop some examples.

 

Selection of plate heat exchanger key

 

Select model specifications

Plate heat exchanger model specifications are very diverse and must be based on specific working conditions and use to make decisions. In the case of heat transfer solutions given to customers, industry exchanges need to be carried out, for example, the total flow rate is large and the pressure drop is small to be able to choose a plate heat exchanger model specification with less frictional resistance, and vice versa.

In particular, when choosing a stainless steel plate type all-welded plate heat exchanger, the main parameters such as temperature must be carefully measured, and the type specification as suitable as possible to achieve long-term smooth use.

 

2. The choice of overflow channels and steps

Plate heat exchanger machinery and equipment within a material the same mobility orientation of a set of tandem flow channel, similar to the plate constitutes a material commodity circulation safety channel, plate for the big factory will apply special processing technology and installation, will not be the same overflow channel to produce a different composition to meet the different requirements of customers.

Customers can carry out calculations based on the main parameters to choose the composition of the steps, in order to ensure that the refrigeration, heat transfer and other processing processes can be achieved, as far as possible, so that the heat transfer index within each material cross-flow channel is close, and to achieve a good heat transfer actual effect.

 

3. Choice of pressure drop

The pressure drop has the most direct impact on the plate heat exchanger, so separate regulations are set.

In the selection of plate heat exchanger models, heat transfer and gas pressure are taken into account to ensure that the process and safety requirements are met and that model selection plans and products are given.

 

So, what is the prevailing way of selecting plate heat exchangers?

1, the adoption of plate heat exchangers must pay attention to the main parameters are: heat exchanger materials, pressure, design solutions temperature, etc.

2, the use of heat exchangers, should be as small as possible to make the side of the heat transfer index to obtain a large flow rate, and as far as possible to make the two liquid heat transfer surface on both sides of the same or similar heat transfer index to enhance the thermal conductivity.

3, with fine sand dirty liquid into the heat exchanger, must first go through the overconsideration and deposition.

4, the use of plate heat exchanger, the temperature difference between the smaller side of the liquid connection flow rate is not suitable for too large, should pay attention to the provisions of the gas pressure can be reached.

5, for the total flow of large allowable gas pressure should be taken for the situation of small friction resistance plate shape, on the contrary, the use of large friction resistance plate shape.

6、According to the working pressure of the liquid and the temperature condition, the off-loading type or full welding type should be used to meet the demand.

7, not suitable for the use of double-plate total area is too small plate, in case the total number of plates is too much, the flow rate between the plates is small, reducing the thermal conductivity.

In short, as long as the key points and ways to seize the model selection of plate heat exchangers, you will be able to choose the most suitable product models for customers.