Shanghai Exheat Industries Co., Ltd
+86-13545529361

Plate heat exchanger sealing gasket characteristics and its replacement steps

Jan 04, 2024

Plate heat exchanger sealing gasket is removable plate heat exchanger is extremely critical components, plate heat exchanger application range is also largely restricted by the sealing gasket, in the strong corrosive media on the sealing gasket requirements are extremely high. Plate heat exchanger sealing gasket as an important part of the service life of the plate heat exchanger has an important impact, if these sealing gaskets hardened and lost the elasticity of the gaskets, may lead to the heat exchanger can not operate normally, because the gasket not only to seal the medium, so that it does not leak to the outside environment, but also to prevent the heat exchange medium between the intermixing, so the sealing gaskets are considered to be the most important and the most important need for the gaskets in the plate heat exchanger. Therefore, the sealing gasket is considered to be the most important and most demanding parts of the plate heat exchanger.

 

Due to the plate heat exchanger application field is expanding, for different media and process have different temperature, pressure and corrosion resistance requirements. Want to use a "universal" gasket to adapt to all situations, is obviously not possible, and should be used for different situations with different materials gasket. Commonly used gasket cross-section shape for the hexagon. Commonly used gasket types are natural rubber, neoprene rubber, EPDM rubber, silicone rubber, fluorine rubber, asbestos fibre sheet and so on. The gasket of the plate heat exchanger should be replaced in time if leakage, breakage, aging, etc. occur during use.

 

Replacement should be carried out in the following order
① Remove the used gasket. Remove the used gasket. Be careful not to make scratches in the gasket groove when removing.
② Use acetone, butanone or other ketone solvents to remove the residual glue in the gasket groove.
③ Use clean cloth or cotton gauze to clean the gasket groove and gasket.
④ Apply the adhesive evenly to the gasket groove.
⑤ Paste the clean new gasket on the board.

⑥ The plate with the gasket affixed should be placed in a flat, cool and ventilated place to dry naturally before installation and use.

 

Exheat exchanger equipment is a professional manufacturer of plate heat exchanger, many years of experience in the field of heat exchanger equipment to protect the quality of the product. We have a strong R & D manufacturing strength, independent development of moulds, according to customer demand to provide product customization services; in order to ensure that the product selection of accurate materials, we set up a laboratory, free of charge to provide customers with water quality testing services, in order to provide the basis for scientific methods for customers to select materials.