Titanium and Stainless Steel Heat Transfer Plate Fp02 Fp04 Fp05 Fp08 Fp09 Fp10 Fp14 Fp16 Fp19 Fp20 Fp205 for Funke Heat Exchanger Plate Replacement

For many years, we have been specializing in the production of vicarb plate v280, heat exchanger life expectancy, FA184 plate gasket. We will firmly grasp the development opportunity, uphold the business philosophy of honesty, development, cooperation and win-win. We usually think and practice corresponding for the change of circumstance, and grow up.

Funke plate heat exchanger spare parts replacement. Exheat provides OEM plate heat exchanger replacement of phe gaskets and plates. Dimension and accurate, materials are high quantity, Exheat phe spare parts can meet the demand of your request.

Funke plate mould

How to pick up correct plate

1. Pressure bearing capacity: The general working pressure is 1.0MPa, and the plate thickness is 0.5mm. If the pressure exceeds 1.0 MPa but less than 1.6 MPa, a thickness of 0.6 mm should be used.

2. Corrosion ability: Generally, we use oil-water, soda, water and water media, so we will choose 0.5mm to facilitate heat transfer. When the medium contains strong corrosive acids, strong alkalis and other media, 0.6mm or 0.7mm plates will be considered, which can increase the surface coefficient of the hot and cold sides of the plate and delay corrosion.

3. Temperature: This is well understood. You can think of thermal expansion and contraction. With the change of temperature, the plate will also shrink and expand. Generally, it is mainly due to the limitation of the movable compression plate. The design temperature of the heat exchanger is not required. Above 150℃, if you want a higher temperature, you can choose a fully welded plate heat exchanger, which can withstand pressure and high temperature. The plate thickness of the fully welded plate heat exchanger can reach 1mm, and the structure is more stable, which is a good choice.

Payment

Logistic

FAQ

Q: When can I get the quotation?

A. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q. How can I get a sample to check your quality?

A.After price confirmation, you can require for samples to check our quality.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: Do you have logistcs company?

A: No, but we have several stable and long cooperated logistcs agent, they are professional about shipment.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

We start from a forward-looking development perspective, and continuously upgrade our Titanium and Stainless Steel Heat Transfer Plate Fp02 Fp04 Fp05 Fp08 Fp09 Fp10 Fp14 Fp16 Fp19 Fp20 Fp205 for Funke Heat Exchanger Plate Replacement through innovation. Our free sample service allows you to try our products before you buy them, and our perfect warehousing and distribution system and sufficient stock enable us to provide on-time and fast delivery. We're sure your any inquiry or requirement will get prompt attention, high-quality merchandise, preferential prices and cheap freight.