Plate Heat Exchanger Plate for Water to Water System (heat exchange station)

With the goal of becoming bigger and stronger, our factory hopes that customers will negotiate and develop together. We are willing to repay users with high-quality GEA VT series plate heat exchanger plate, fp04 gasket, SPX phe gaskets and excellent service. Our company has a large number of high-quality talents who are united, diligent, realistic, innovative and dedicated, strict production management and advanced production technology. Looking forward to working with you Now! With the rapid development of world trade globalization, we will seize development opportunities, meet challenges, and create new brilliance in this field.

Funke plate heat exchanger spare parts replacement. Exheat provides OEM plate heat exchanger replacement of phe gaskets and plates. Dimension and accurate, materials are high quantity, Exheat phe spare parts can meet the demand of your request.

Funke plate mould

How to pick up correct plate

1. Pressure bearing capacity: The general working pressure is 1.0MPa, and the plate thickness is 0.5mm. If the pressure exceeds 1.0 MPa but less than 1.6 MPa, a thickness of 0.6 mm should be used.

2. Corrosion ability: Generally, we use oil-water, soda, water and water media, so we will choose 0.5mm to facilitate heat transfer. When the medium contains strong corrosive acids, strong alkalis and other media, 0.6mm or 0.7mm plates will be considered, which can increase the surface coefficient of the hot and cold sides of the plate and delay corrosion.

3. Temperature: This is well understood. You can think of thermal expansion and contraction. With the change of temperature, the plate will also shrink and expand. Generally, it is mainly due to the limitation of the movable compression plate. The design temperature of the heat exchanger is not required. Above 150℃, if you want a higher temperature, you can choose a fully welded plate heat exchanger, which can withstand pressure and high temperature. The plate thickness of the fully welded plate heat exchanger can reach 1mm, and the structure is more stable, which is a good choice.

Payment

Logistic

FAQ

Q: When can I get the quotation?

A. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q. How can I get a sample to check your quality?

A.After price confirmation, you can require for samples to check our quality.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: Do you have logistcs company?

A: No, but we have several stable and long cooperated logistcs agent, they are professional about shipment.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

We always pursue the advanced international management mode and constantly absorb the advanced technology of international and domestic Plate Heat Exchanger Plate for Water to Water System (heat exchange station) equipment industry. We are more willing to regard ourselves as a partner of our customers, and continue to create value for them. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.