Plate Heat Exchanger and Heating Exchanger Rubber Gasket

Our company attaches great importance to staff development and training to support our commitment to p26 plate, r14 thick plate, heat exchanger gasket repair quality. Our company caters to the needs of the market and continuously develops and manufactures more high-quality, cost-effective products for customers. We have launched a real-time monitoring and management analysis system for production process control and quality inspection, which provides a favorable guarantee for improving the modern management level of the industry. Our products are most effective sold not only during the Chinese market, but also welcomed during the international industry.

Funke plate heat exchanger spare parts replacement. Exheat provides OEM plate heat exchanger replacement of phe gaskets and plates. Dimension and accurate, materials are high quantity, Exheat phe spare parts can meet the demand of your request.

Funke plate mould

How to pick up correct plate

1. Pressure bearing capacity: The general working pressure is 1.0MPa, and the plate thickness is 0.5mm. If the pressure exceeds 1.0 MPa but less than 1.6 MPa, a thickness of 0.6 mm should be used.

2. Corrosion ability: Generally, we use oil-water, soda, water and water media, so we will choose 0.5mm to facilitate heat transfer. When the medium contains strong corrosive acids, strong alkalis and other media, 0.6mm or 0.7mm plates will be considered, which can increase the surface coefficient of the hot and cold sides of the plate and delay corrosion.

3. Temperature: This is well understood. You can think of thermal expansion and contraction. With the change of temperature, the plate will also shrink and expand. Generally, it is mainly due to the limitation of the movable compression plate. The design temperature of the heat exchanger is not required. Above 150℃, if you want a higher temperature, you can choose a fully welded plate heat exchanger, which can withstand pressure and high temperature. The plate thickness of the fully welded plate heat exchanger can reach 1mm, and the structure is more stable, which is a good choice.

Payment

Logistic

FAQ

Q: When can I get the quotation?

A. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q. How can I get a sample to check your quality?

A.After price confirmation, you can require for samples to check our quality.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: Do you have logistcs company?

A: No, but we have several stable and long cooperated logistcs agent, they are professional about shipment.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

We have many excellent staff members good at marketing, QC, and dealing with kinds of troublesome problem in the production process for Plate Heat Exchanger and Heating Exchanger Rubber Gasket. Our company adheres to the business philosophy of integrity as the cornerstone, innovation as the driving force, performance as the goal, harmony as the guarantee and safety as the premise. Give us a chance to show you our professionalism and passion.