Manganese Casting Nordberg Sandvik Symons Jaw Crusher Parts Tooth/Jaw Plate

Our company increases the strength of scientific and technological innovation, promotes the improvement and improvement of product quality by technological progress, and enhances the awareness of gea gasket VT180, LR9 apv gasket, LWC250S gea gasket quality management. We improve our product design process to shorten the product development cycle without reducing the quality of product design. We are able to adjust ourselves to difficulties and setbacks arising from changes and positively influence and motivate our colleagues.

Funke plate heat exchanger spare parts replacement. Exheat provides OEM plate heat exchanger replacement of phe gaskets and plates. Dimension and accurate, materials are high quantity, Exheat phe spare parts can meet the demand of your request.

Funke plate mould

How to pick up correct plate

1. Pressure bearing capacity: The general working pressure is 1.0MPa, and the plate thickness is 0.5mm. If the pressure exceeds 1.0 MPa but less than 1.6 MPa, a thickness of 0.6 mm should be used.

2. Corrosion ability: Generally, we use oil-water, soda, water and water media, so we will choose 0.5mm to facilitate heat transfer. When the medium contains strong corrosive acids, strong alkalis and other media, 0.6mm or 0.7mm plates will be considered, which can increase the surface coefficient of the hot and cold sides of the plate and delay corrosion.

3. Temperature: This is well understood. You can think of thermal expansion and contraction. With the change of temperature, the plate will also shrink and expand. Generally, it is mainly due to the limitation of the movable compression plate. The design temperature of the heat exchanger is not required. Above 150℃, if you want a higher temperature, you can choose a fully welded plate heat exchanger, which can withstand pressure and high temperature. The plate thickness of the fully welded plate heat exchanger can reach 1mm, and the structure is more stable, which is a good choice.

Payment

Logistic

FAQ

Q: When can I get the quotation?

A. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q. How can I get a sample to check your quality?

A.After price confirmation, you can require for samples to check our quality.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: Do you have logistcs company?

A: No, but we have several stable and long cooperated logistcs agent, they are professional about shipment.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

Our company is developing towards the direction of 'unity, harmony, atmosphere and openness', and is committed to providing Manganese Casting Nordberg Sandvik Symons Jaw Crusher Parts Tooth/Jaw Plate with quality assurance for the groups in need. We know that we need to scientifically grasp the characteristics of the times and improve the core competitiveness of enterprises through the innovation of new technologies in order to win market competition. Our company has advanced production equipment and strong financial strength.