Heat Exchanger Spares, Plate and Gasket, Made of SS304, 316L or Titanium

Therefore, the performance and effects of our gea gasket VT180, Plate Heat Exchanger Gasket, funke fps100 gasket is not inferior to imported product. Our company invests more technical force to improve product quality and service level to ensure the market position and product competitiveness of the enterprise. Our strategic goal of aiming for the world's best relies on our boldness and courage in pursuing excellence. The team spirit is the soul of an enterprise and an inexhaustible driving force for the sustainable development of an enterprise.

Funke plate heat exchanger spare parts replacement. Exheat provides OEM plate heat exchanger replacement of phe gaskets and plates. Dimension and accurate, materials are high quantity, Exheat phe spare parts can meet the demand of your request.

Funke plate mould

How to pick up correct plate

1. Pressure bearing capacity: The general working pressure is 1.0MPa, and the plate thickness is 0.5mm. If the pressure exceeds 1.0 MPa but less than 1.6 MPa, a thickness of 0.6 mm should be used.

2. Corrosion ability: Generally, we use oil-water, soda, water and water media, so we will choose 0.5mm to facilitate heat transfer. When the medium contains strong corrosive acids, strong alkalis and other media, 0.6mm or 0.7mm plates will be considered, which can increase the surface coefficient of the hot and cold sides of the plate and delay corrosion.

3. Temperature: This is well understood. You can think of thermal expansion and contraction. With the change of temperature, the plate will also shrink and expand. Generally, it is mainly due to the limitation of the movable compression plate. The design temperature of the heat exchanger is not required. Above 150℃, if you want a higher temperature, you can choose a fully welded plate heat exchanger, which can withstand pressure and high temperature. The plate thickness of the fully welded plate heat exchanger can reach 1mm, and the structure is more stable, which is a good choice.

Payment

Logistic

FAQ

Q: When can I get the quotation?

A. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q. How can I get a sample to check your quality?

A.After price confirmation, you can require for samples to check our quality.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: Do you have logistcs company?

A: No, but we have several stable and long cooperated logistcs agent, they are professional about shipment.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

Our Heat Exchanger Spares, Plate and Gasket, Made of SS304, 316L or Titanium with excellent product performance and a wide range of market applications, reflecting a huge market space and development potential. We constantly enhance the quality awareness, improve the market competitiveness of products, and then improve the profitability of our company. In the future, we will focus more on brand enhancement, product structure optimization and customer service improvement.