Gea Vt130 Durable Plate Flat Plate Heat Exchanger

Over the years, we have always adhered to a firm belief and committed to bringing assured gas heat exchanger, water cooling heat exchanger, gasket model to consumers. We build the image outside, strengthen the quality inside, comprehensively improve the comprehensive competitiveness of the enterprise and realize the benign leaping development of our company. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. Our development goal is the direction of the flag that leads all employees to unite and advance, and is the strength of faith that inspires us to pioneer and innovate. In today's market conditions, demand is often changing, thus we need always pay attention to customer needs if we want to long-term development.

Plate heat exchanger are consist of plate packs, frame, and bolt, upper guide, lower guide and bar. plates with seal gaskets are packed between the front and movable frame , there is a certain gap between the heat transfer plates that allows liquid to flow. The liquid inlets and outlets are in the fixed frame or the movable frame.

Product characters

In a beverage production line, gasketed plate heat exchangers are ideal equipment for liquid-liquid and liquid-steam heat exchange. It has the characteristics of high heat exchange efficiency, low heat loss, compact and lightweight structure, small footprint, convenient installation and cleaning, wide application, long service life and so on. Under the same pressure loss, its heat transfer coefficient is 3-5 times higher than that of the tube heat exchanger, covering an area of one third of that of the tube heat exchanger, and the heat recovery rate can be as high as 90% or more. Plate heat exchangers are widely used in food and beverage industries and are excellent equipment for heating, cooling, heat recovery and rapid sterilization.

Features of plate heat exchanger

1. high heat transfer coefficient

Plate ripple design, to the height of the film thermal conductivity as the goal, fluid at very low flow rate can occur a strong disturbance flow, generally speaking, plate heat exchanger heat transfer coefficient K value in the range of 3000-6000W/m2 degrees C.

2. low cost

Under the premise of the same heat transfer, the low metal consumption, floor space, fluid resistance, cooling water usage and other items of the value of the reduction, making the investment cost greatly reduced.

3. the heat loss is small

Due to its compact size and small size, the external area of the heat exchanger is also very small, so the heat loss is also very small, usually the equipment no longer needs to keep warm.

4. compact, easy to repair

Very small space can be combined with a large heat exchange area, the equipment itself can provide repair space, no need for additional disassembly space.

5.It is conducive to the use of low-temperature heat sources, the use of safe and reliable, flexible combination

Payment

Logistic

FAQ

Q: Does your gasket has ISO9001 Certificate?

A: Yes, we have

Q: What is your main market

A: Europe, North America, South America and East Asia.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: What is your factory's biggest advantage?
A: Technology is our core competitiveness.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

Our company constantly carries out technological innovation and new Gea Vt130 Durable Plate Flat Plate Heat Exchanger development to stabilize and improve our market position. The company upholds the way of honest management, and we always regard the reputation as the fundamental of enterprise survival and development. After years of re exploration, re optimization and re practice, our company has basically formed a long-term mechanism of strategic management.