Flow or Blind Plate Equal Funke Fp16 for Heat Exchanger

Customers recognize the consistent outstanding quality of our company's fp31 plate, SWEP plate, plate heat exchanger milk processing and always tend to buy our products. We hope that all employees will perform their duties with a high sense of responsibility and execution, continuously improve their personal qualities and work skills, and improve customer satisfaction. We always continually offer you the most conscientious purchaser services, and the widest variety of designs and styles with finest materials. Our company takes knowledge management as the core to continuously improve our soft power.

Funke plate heat exchanger spare parts replacement. Exheat provides OEM plate heat exchanger replacement of phe gaskets and plates. Dimension and accurate, materials are high quantity, Exheat phe spare parts can meet the demand of your request.

Funke plate mould

How to pick up correct plate

1. Pressure bearing capacity: The general working pressure is 1.0MPa, and the plate thickness is 0.5mm. If the pressure exceeds 1.0 MPa but less than 1.6 MPa, a thickness of 0.6 mm should be used.

2. Corrosion ability: Generally, we use oil-water, soda, water and water media, so we will choose 0.5mm to facilitate heat transfer. When the medium contains strong corrosive acids, strong alkalis and other media, 0.6mm or 0.7mm plates will be considered, which can increase the surface coefficient of the hot and cold sides of the plate and delay corrosion.

3. Temperature: This is well understood. You can think of thermal expansion and contraction. With the change of temperature, the plate will also shrink and expand. Generally, it is mainly due to the limitation of the movable compression plate. The design temperature of the heat exchanger is not required. Above 150℃, if you want a higher temperature, you can choose a fully welded plate heat exchanger, which can withstand pressure and high temperature. The plate thickness of the fully welded plate heat exchanger can reach 1mm, and the structure is more stable, which is a good choice.

Payment

Logistic

FAQ

Q: When can I get the quotation?

A. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q. How can I get a sample to check your quality?

A.After price confirmation, you can require for samples to check our quality.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: Do you have logistcs company?

A: No, but we have several stable and long cooperated logistcs agent, they are professional about shipment.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

We can provide customers with a full range of Flow or Blind Plate Equal Funke Fp16 for Heat Exchanger solutions and professional services. What our company pursues is professionalism and single-mindedness. We always adhere to the corporate tenet of 'integrity, innovation, and communication', and take the team spirit of 'technology and service' as the foundation of our business, so as to continuously improve customer satisfaction. Based on the corporate tenet of 'creating value for customers and developing together with customers', we will do our best to provide you with high-quality products and perfect services.