Cooling and Heating High Efficiency Funke FP60 PHE Plate/Nickel Heat Exchanger Plate

Our company has a group of experienced technical management personnel and complete production capabilities and inspection equipment to verify and ensure the quality of NF350 clip on plate, Exheat Plate Heat Exchanger, NT50X phe plate. We are committed to meeting the needs of our customers from different industries in terms of high-tech, quality, delivery, cost-effectiveness and any other demanding requests. We seek to earn the satisfication and trust of our customers by developing and providing products and services that are highly reliable and beneficial to society. We firmly believe product acceptance is not the end, but the beginning of our service, and we offer perfect and timely after-sales service so that you have no worries.

Funke plate heat exchanger spare parts replacement. Exheat provides OEM plate heat exchanger replacement of phe gaskets and plates. Dimension and accurate, materials are high quantity, Exheat phe spare parts can meet the demand of your request.

Funke plate mould

How to pick up correct plate

1. Pressure bearing capacity: The general working pressure is 1.0MPa, and the plate thickness is 0.5mm. If the pressure exceeds 1.0 MPa but less than 1.6 MPa, a thickness of 0.6 mm should be used.

2. Corrosion ability: Generally, we use oil-water, soda, water and water media, so we will choose 0.5mm to facilitate heat transfer. When the medium contains strong corrosive acids, strong alkalis and other media, 0.6mm or 0.7mm plates will be considered, which can increase the surface coefficient of the hot and cold sides of the plate and delay corrosion.

3. Temperature: This is well understood. You can think of thermal expansion and contraction. With the change of temperature, the plate will also shrink and expand. Generally, it is mainly due to the limitation of the movable compression plate. The design temperature of the heat exchanger is not required. Above 150℃, if you want a higher temperature, you can choose a fully welded plate heat exchanger, which can withstand pressure and high temperature. The plate thickness of the fully welded plate heat exchanger can reach 1mm, and the structure is more stable, which is a good choice.

Payment

Logistic

FAQ

Q: When can I get the quotation?

A. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q. How can I get a sample to check your quality?

A.After price confirmation, you can require for samples to check our quality.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: Do you have logistcs company?

A: No, but we have several stable and long cooperated logistcs agent, they are professional about shipment.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

We have accumulated rich experience and good reputation in years of serving customers, which making us a reliable Cooling and Heating High Efficiency Funke FP60 PHE Plate/Nickel Heat Exchanger Plate supplier to clients from countries over the world. We are a comprehensive, scientific and technological enterprise integrating R & D and production. With our strong manufacturing partners capabilities, we create a 'One Stop' solution for our customers. We will actively promote structural adjustment, enhance the overall competitiveness of the brand, and create an influential brand.