Apv M60 Gasket with NBR EPDM Viton for Plate Heat Exchanger Manufacturer

'Positiveness, wise change, joint efforts, and win-win' is our corporate culture. We have been actively promoting the development of phe plate and gasket, vicarb plate v280, LWC350M heat exchanger plate. We do our best to create fine services for our customers. We will continue to make persistent efforts and strive for your satisfaction with a hundred times of efforts and constantly surpass ourselves.

Funke plate heat exchanger spare parts replacement. Exheat provides OEM plate heat exchanger replacement of phe gaskets and plates. Dimension and accurate, materials are high quantity, Exheat phe spare parts can meet the demand of your request.

Funke plate mould

How to pick up correct plate

1. Pressure bearing capacity: The general working pressure is 1.0MPa, and the plate thickness is 0.5mm. If the pressure exceeds 1.0 MPa but less than 1.6 MPa, a thickness of 0.6 mm should be used.

2. Corrosion ability: Generally, we use oil-water, soda, water and water media, so we will choose 0.5mm to facilitate heat transfer. When the medium contains strong corrosive acids, strong alkalis and other media, 0.6mm or 0.7mm plates will be considered, which can increase the surface coefficient of the hot and cold sides of the plate and delay corrosion.

3. Temperature: This is well understood. You can think of thermal expansion and contraction. With the change of temperature, the plate will also shrink and expand. Generally, it is mainly due to the limitation of the movable compression plate. The design temperature of the heat exchanger is not required. Above 150℃, if you want a higher temperature, you can choose a fully welded plate heat exchanger, which can withstand pressure and high temperature. The plate thickness of the fully welded plate heat exchanger can reach 1mm, and the structure is more stable, which is a good choice.

Payment

Logistic

FAQ

Q: When can I get the quotation?

A. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

Q. How can I get a sample to check your quality?

A.After price confirmation, you can require for samples to check our quality.

Q: What is your trade term supported?

A: EXW, FOB, CIF, CFR, DDU are all available.

Q: Do you have logistcs company?

A: No, but we have several stable and long cooperated logistcs agent, they are professional about shipment.

Q: What's your normal payment terms?

A: 30%T/T in advance, 70% balance payment finished before shipment.

In order to make our company a leading manufacturer of Apv M60 Gasket with NBR EPDM Viton for Plate Heat Exchanger Manufacturer and to achieve our common goals, we take quality first, customer first, and social responsibility as our company's values. We always adhere to the people-oriented concept that production must be safe and human rights must be guaranteed. The growth of our company contains our unremitting efforts and the pursuit of high-quality products, and is also the result of the support and trust of our new and old partners.