Wide Channel Free Flow Plate Heat Exchanger

There are fiber or coarse particles of fluid and high viscosity fluid media (such as petrochemical, sugar, paper, oil refining, etc.) In some heat transfer processes, the traditional solution is to use spiral plate heat exchanger. but there is abvious defects, such as: low heat transfer coefficient, can not be cleaned.

But GEA N40 FA184 FA192 plate heat exchanger with large gap free flow can provide smooth channels for heat exchanger,which ensure high turbulence products and high heat transfer efficiency. The use of this heat exchanger and the time of the two cleaning intervals are longer than the spiral plate heat exchanger, while the surface of the plate is also very easy to use manual cleaning.

Product technical features:
1.Treatment with fiber or particle diameter of 3/16 inch (individual models can reach 3/8 inch)
2.Use gaskets for easy disassembly and maintenance.
3.Design pressure up to 150 psig (special design pressure up to 300 psig) Conventional design temperature of 300 ℉ (special requirements of up to 350 ℉ above).
4.No metal contacts in the middle of the plate
5.There are no dead ends on the board
6.Up to 12mm fixed plate between the groove
7.Can be cleaned online
8.Suitable for the production of fiber and solid products (including fiber and pulp of fruit juice, paper mills and pulp mill wastewater, spinning Weaving and sugar industry, as well as other high viscosity products)
Entrance area: Low pressure drop No dead ends Uniform shunt
Advantages: the characteristics of the two fluids can be one side or both sides of the gap for a large gap to adapt to the fiber or coarse particles of liquid and high viscosity liquid, light weight, small size, simple installation, maintenance space is small, To be frequent cleaning can be maintained for a long time to run, reduce maintenance costs only need to increase or decrease the number of plates can easily adjust the heat transfer capacity
"Free-Flow" free-flow plate heat exchanger features and unique advantages
Large particles of liquid and slurry could flow through the plates
It is easy to be disassembled and cleaned
low cost because of high heat transfer coefficient
compact structure
Flexible design
stop fluid cross-contamination
different materials

Q:you have the test and audit service?
A: Yes, we can assist to get the designated test report for product and the designated factory audit report.