Marine Heat Exchangers

Description Plate coolers are important heat exchange equipment in ship cooling systems. Marine plate coolers use seawater or fresh water as cooling media, and take away heat through a specially designed plate structure to meet the liquid temperature at the equipment inlet. The ship's main engine is cooled by a high-temperature fresh water closed cooling system, and the high-temperature fresh water and various lubricating oils are cooled by a low-temperature fresh water closed cooling system. The low-temperature fresh water is then cooled by seawater through a central cooler.

Product parameter of gasketed plate heat exchanger

Item	marine heat exchangers
Brand	Exheat
Plate material	Titanium 0.5mm 0.6mm 0.7mm 0.8mm 1mm
Gasket material	NBR HNBR EPDM HEPDM VITON FKM Silicone
Frame material	Painted Carbon steel
Color of frame	blue or customed color
Connection type	flange or thread
Flange standard	ANSI ASME BS BA JIS DIN GB ISO
Tightening bolt	M24 M30 M39
Design pressure	highest 20mpa, lowest 10Mpa
Work pressure	normal 12.5Mpa
MOQ	1 set
Package	polywood case
Warranty	one year
OEM	Can make replacement

Product working parameters for caculations

What kind of hot source

1.Inlet temperature of hot source

2.Flow rate of hot source

3.How much degree should the swimming pool water be heated

4.How much time when the swimming pool water is heated to requested temperature

5.The initial temperature of swimming pool water

6.Volume of swimming pool water

7.Flow rate of swimming pool water

8.The circulationg times

We need to know at least 5 parameters so that we could caculate by software

product-730-710

Product Advantages

1. High energy saving: Its heat transfer coefficient is 3000-4500kcal/m2·°C·h, which is 3-5 times higher than the thermal efficiency of shell and tube heat exchanger.

2. Compact structure: The plates of plate heat exchanger are closely arranged. Compared with other types of heat exchangers, the plate heat exchanger occupies less area and space. The plate heat exchanger with the same heat transfer area is only 1/5 of the shell and tube heat exchanger.

3. Easy to clean and convenient to disassemble and assemble: The plate heat exchanger clamps the clamping plate by clamping bolts, so it is easy to disassemble and assemble, and can be opened for cleaning at any time. At the same time, due to the smooth surface of the plate and high turbulence, it is not easy to scale.

4. Long service life: The plate heat exchanger is pressed with stainless steel or titanium alloy plates, which can withstand various corrosive media, and the rubber pads can be replaced at will, and it can be conveniently disassembled and repaired.

5. Strong adaptability: The plates of plate heat exchanger are independent components, and the process can be increased or decreased as required, in various forms; it can be applied to various different process requirements.

6. No liquid cross-contamination. The sealing groove of the plate heat exchanger is equipped with a drainage channel, so various media will not cross-contaminate each other. Even if leakage occurs, the medium will always be discharged outwards.

Payment